Take full command of your grow room lighting with precision and ease. The FloraFlex Master Lighting Controller gives commercial and hobbyist growers centralized control over up to 100 ballasts per output group, with programmable sunrise/sunset cycles, dual temperature sensing, and a dimming range of 10–115%—all from a single compact unit. Stop managing lights manually and start dialing in the exact photoperiod and intensity your plants need to perform at their peak.
Why FloraFlex Master Lighting Controller
The FloraFlex Master Lighting Controller is built for growers who demand precision at scale. With two independent control groups (A/B), you can manage separate zones—vegetative and flowering rooms, for example—from one centralized controller. The output range of 10% to 115% gives you fine-tuned dimming capability that most basic timers and controllers simply can't match, allowing you to optimize light intensity for each stage of growth or gradually ramp up during sunrise/sunset periods to reduce plant stress.
Backed by a 3-year warranty and engineered to support a wide range of ballast types (315W through 1000W), the FloraFlex Master Lighting Controller integrates seamlessly into both new and existing grow room setups. Its overheat protection and alarm ports add a critical layer of safety and monitoring that protects your investment and your crop.
Key Benefits
- Dual Independent Control Groups – Manage two separate lighting zones (A/B) independently from a single controller for maximum grow room flexibility.
- Wide Dimming Range (10%–115%) – Fine-tune light intensity across a broad spectrum to match each growth stage and reduce energy consumption during off-peak periods.
- Sunrise/Sunset Programming – Gradual light ramp-up and ramp-down reduces plant stress and mimics natural light transitions for healthier growth cycles.
- Supports Up to 100 Ballasts Per Group – Scale effortlessly across large commercial operations without needing multiple controllers.
- Dual Temperature Sensors – Monitor temperature in both control zones and trigger overheat protection automatically to safeguard your equipment and plants.
- Broad Ballast Compatibility – Works with 315W, 500W, 600W, 630W, 750W, 945W, and 1000W ballasts for versatile integration into any lighting setup.
- Alarm & ECM Ports – Built-in NO/NC alarm ports and ECM ports per group enable advanced monitoring and integration with environmental control systems.
- 3-Year Warranty – FloraFlex backs this controller with a 3-year warranty, reflecting confidence in its build quality and long-term reliability.
Use Cases
- Commercial Grow Facilities – Centralize control of large-scale lighting arrays across multiple rooms or zones, reducing labor and improving consistency.
- Multi-Stage Grow Rooms – Run separate A/B groups for veg and flower rooms simultaneously, each with independent schedules and dimming profiles.
- Cannabis Cultivation – Program precise photoperiods and intensity curves for each growth stage—from seedling through late flower—to maximize yield and quality.
- Greenhouse Operations – Supplement natural light with controlled artificial lighting, using sunrise/sunset programming to blend seamlessly with ambient light cycles.
- Energy Management – Use the dimming range to reduce power draw during non-critical periods, lowering electricity costs without sacrificing plant performance.
- Environmental Control Integration – Connect via ECM and alarm ports to broader environmental control systems for fully automated grow room management.
Directions for Use
- Mount the controller in a dry, accessible location within your grow room or control area.
- Connect ballasts to the appropriate A or B output group using compatible control cables (max 100 meters per group).
- Attach temperature sensors to each group to enable overheat protection and temperature monitoring.
- Configure ballast type in the setup menu: select from 315W, 500W, 600W, 630W, 750W, 945W, 1000W, or "Not Sure."
- Program your desired photoperiod schedule, including sunrise/sunset ramp durations.
- Set dimming levels (10%–115%) for each group independently based on your crop's light requirements.
- Connect alarm and ECM ports to external monitoring or environmental control systems as needed.
- Refer to the FloraFlex product manual for full wiring diagrams, setup instructions, and safety guidelines.
What Growers Are Saying
"We run 80 ballasts across two flower rooms and this controller handles everything flawlessly. The sunrise/sunset feature alone has made a noticeable difference in our plants' stress levels at lights-on."
— Marcus T., Commercial Cannabis Grower
"Finally a controller that supports both my veg and flower rooms independently. Setup was straightforward and the build quality is exactly what I'd expect from FloraFlex."
— Sarah P., Greenhouse Grower
"The dimming range and ballast compatibility made this a perfect fit for my mixed lighting setup. Three years in and it's never missed a beat."
— Daniel R., Indoor Cultivator
Frequently Asked Questions
How many ballasts can the FloraFlex Master Lighting Controller support?
The controller supports up to 100 ballasts per output group, with two independent groups (A and B), for a potential total of 200 ballasts across a single installation.
What ballast types are compatible?
The controller is compatible with 315W, 500W, 600W, 630W, 750W, 945W, and 1000W ballasts. A "Not Sure" setting is also available if your ballast type is unknown.
Can I control two separate rooms or zones independently?
Yes. The A and B output groups operate independently, allowing you to set different schedules, dimming levels, and temperature thresholds for two separate zones from one controller.
What is the maximum cable length per group?
Each control group supports cable runs of up to 100 meters, providing flexibility for larger facilities and equipment layouts.
Does it integrate with environmental control systems?
Yes. The controller includes ECM ports (A/B) and alarm ports with NO/NC configurations per group, enabling integration with compatible environmental controllers and monitoring systems.
What warranty does the FloraFlex Master Lighting Controller carry?
FloraFlex backs this controller with a 3-year warranty, covering defects in materials and workmanship under normal use conditions.
Output Range : 10%-115%
Numbers of ballasts per output : 100 pcs Max
Max cable length per group : 100 meters
Control voltage outputs : 2 Group s, A/ B
Temperature sensor : 2 Group s, A/ B
Over heat protection : Yes
Sunrise/sunset period : Yes
Setup ballast type : 1000W/945W/750W/630W/600W/500W/315W/Not Sure
Alarm port : 2 Groups, NO/NC
ECM port : 2 Groups, A/B;
Weight : 0.5kg
Warranty : 3 years