Universal Candy Demolder

$3,231.00
$3,231.00
Quantity must be 1 or more
Ball 80 THC
Button 80
Custom Mold - NOT Truffly Made
Custom Mold - Truffly Made
Diamond 80
Dice 80
Dome 80
Drop 80
Gumdrop 80
Jelly Bean 80
Macaron 54
Macaron 80
Mini Ball 80
Mini Ball 80 THC
Mini Cube 80
Mini Cube 80 THC
Mini Pyramid 54
Mini Round Dice 80 THC
Mini Rounded Square 80
Mini Rounded Square 80 THC
Mini Square 54 THC
Mini Square 80
Mini Square 80 THC
Nutrix 80
Petit Cube 80
Puck 80
Rounded Triangle 80
Rounded Triangle 80 THC
Square 54
Square Bacarat 54

Universal Candy Demolder

Universal Candy Demolder is designed to remove a full sheet of candies from molds in one “pop”. Demold your trays in second! Ideal for Hard Candies, Gummies, Caramels, Chocolate and Fruit Jelly! The mold “Popper” includes one standard mold frame to match the mold you are using. Please note that the mold is not included. Custom mold plates are available for additional 911 USD to work with your silicone molds.

Dimensions: 19.75” w x 19.25” L x 8.25” H

The Universal Demolder is compatible with most Truffly Made molds and Non-Truffly Made molds as long as the cavities can be popped inside-out completely and minimum 8mm spacing between each cavities.

Maximum cavities per mold = 80

Maximum Mold size = 11.5 x 15”

Please contact info@trufflymade.com for a custom quote

LARGE PIN FITTINGS AVAILABLE HERE ☜

Please select the type of mold you are using from the list, All Truffly Made molds listed are compatible with the demolder. For any silicone mold not listed, or is from a different manufacturer, please contact us before placing an order to verify compatibility.

The Truffly Made Universal Demolder.

Easy to use, just one pull to pop out a full mold sheet of candies. Works best if the candies are cooled off and hardened!

  • Select the mold frame that matches the mold you are using.
  • Place the mold frame on to the Demolder.
  • Add your filled mold on top of frame.
  • Pull lever.
  • DONE! All your candies are demolded.

PLEASE NOTE THAT THE UNMOLDING EFFICIENCY IS VARIABLE DEPENDING ON PRODUCT STICKINESS.

WE RECOMMAND TO UNMOLD WITHIN 3 HOURS AFTER DEPOSITNG FOR BETTER EFFICIENCY.

SILICONE MOLDS CAN BE PRE-COATED USING MCT OIL , MINERAL OIL OR COOKING SPRAY TO INCREASE UNMOLDING EFFICIENCY.

Go to full site